Black Faux Leather Chest Harness with Wrist Cuff Set

This black faux leather chest harness arrives as a coordinated two-piece set: a dual-strap shoulder harness with a horizontal chest crossbar and a matching wrist cuff, both finished with silver-tone pin buckles and punched adjustment holes along every strap.

Chest Harness Strap Design

Two independent shoulder straps run from front to back, anchored by a single horizontal chest band that sits across the sternum. Each strap features multiple punched holes spaced at roughly 1 cm intervals, giving you a precise fit over a bare chest or layered over a fitted t-shirt or tank. The silver-tone pin buckles are sturdy enough to hold position all day without re-adjusting mid-wear.

• Dual shoulder straps in approximately 1.5 cm wide black faux leather
• Horizontal chest crossbar with silver-tone pin buckle, adjustable width
• Punched holes on all straps for multi-point sizing
• Works over a white t-shirt, tank, or bare chest equally well
• Hardware is silver/chrome tone throughout — no mixed metals

Wrist Cuff Included

The matching wrist cuff is cut from the same black faux leather and closes with an identical silver-tone buckle. At roughly 6 cm wide, it sits firmly at the wrist without sliding. Wearing the cuff with the chest harness creates a cohesive streetwear or festival outfit in one purchase; worn solo, the cuff works as a standalone accessory with casual or edgy looks.

• Included wrist cuff in matching black faux leather, approx. 6 cm wide
• Single silver-tone pin buckle with 5 adjustment holes
• Fits most adult wrist sizes without modification
• Sold as a set — chest harness plus one wrist cuff

Styling the Harness

The most direct outfit combination is over a plain white or grey fitted t-shirt — as shown — for an instant streetwear or rave-ready contrast. For a festival harness look, pair with a mesh top underneath and loose trousers; the black straps read clearly over any light base. For a nightclub or party outfit, wear over a bare chest with slim black trousers; the horizontal chest band creates a structured silhouette without bulk. The minimal strap count keeps this harness vest compatible with jackets, meaning you can layer a moto jacket over the shoulders and let the chest band show below the lapels.

Sizing and Fit Notes

Chest harness sizing is driven by chest circumference. The shoulder straps and chest band are independently adjustable, so this design fits a chest range of roughly 80 cm to 130 cm (XS through 3XL body types). Buyers with chest measurements above 130 cm should select an extended size at checkout. Note: the straps are fixed length at the shoulder connection point — if you need very long shoulder-to-chest distance (tall frames above 195 cm), verify total strap length before ordering. The wrist cuff fits wrists from approximately 16 cm to 22 cm circumference.

Material and Care

Both the chest harness and wrist cuff are made from vegan faux leather bonded over a fabric backing — no animal products. The silver-tone hardware is zinc alloy. To clean, wipe the leather surface with a damp cloth and mild soap, then air dry away from direct heat. Do not submerge in water or machine wash, as prolonged soaking degrades the bonded faux leather surface over time. Store flat or rolled, not folded, to prevent crease marks on the straps.