Black Faux Leather Full Body Cage Harness with Choker

This black faux leather full body cage harness connects a structured O-ring choker to a multi-strap chest frame and a stacked waist cage, finishing with detachable garter strap loops at the hips. Every section is joined by silver-tone metal O-rings and stud rivets, creating a unified cage silhouette rather than separate harness pieces. Strap widths measure approximately 1.2 cm throughout, keeping the layered look graphic without adding bulk.

Chest and Collar Construction

The harness opens at a close-fitting choker collar fastened with a buckle clasp and centred with a circular O-ring. Two shoulder straps drop from the collar to a chest cross-point, where silver stud rivets anchor them to a triangular chest frame. The chest section sits above the bust, so it layers cleanly over a bralette or festival crop top without hiding it.

• Collar circumference adjustable from approximately 30 cm to 40 cm via single-prong buckle
• Chest strap span roughly 28 cm across at the widest cross-point
• Silver O-ring at collar centre, diameter approximately 2.5 cm
• Stud rivets along chest straps add structural detail without sharp edges
• Chest frame designed to sit above the bust line for layering versatility

Waist Cage and Garter Extensions

Below the chest, a single vertical strap descends the torso and feeds into a five-band horizontal waist cage that spans from below the ribcage to the hip crest. Three additional O-rings appear at the waist and hip level, reinforcing the cage structure. Garter loops at the lower hip edge hang freely or can be clipped to thigh-high stockings for a festival or editorial rave look.

• Five horizontal waist bands, each 1.2 cm wide, spaced evenly across roughly 18 cm of torso
• Hip O-rings, diameter approximately 2 cm, anchor the waist-to-garter transition
• Garter straps extend approximately 12-15 cm below the hip cage
• Each garter loop terminates in a small metal clip for stocking attachment
• Trade-off: the fixed vertical torso strap limits stretch, so slim-to-average torso lengths (approx 35-48 cm nape to waist) get the best fit

Sizing and Fit

The harness is cut for torso circumferences of roughly 60-100 cm at chest and 55-90 cm at waist, covering XS through 3XL body frames without modification. Buyers on the upper end of that range should note that the five-band waist cage has the least adjustment range — order one size up if your waist exceeds 88 cm. The collar and shoulder straps each carry a separate buckle, so chest and neck fit can be tuned independently. This is a fashion harness worn over clothing or swimwear, not a structural weight-bearing harness.

Material and Care

Straps are cut from vegan faux leather bonded to a thin fabric backing, giving them a smooth matte finish that holds its shape after repeated wear. Silver-tone metal hardware is zinc alloy — lightweight and rust-resistant under normal indoor conditions, but avoid prolonged exposure to water or high humidity to prevent surface oxidation. To clean, wipe straps with a damp cloth and mild soap; do not submerge, tumble dry, or iron. Store flat or rolled to prevent permanent crease marks on the narrow straps.