Black Faux Leather Peplum Harness with Tassel Leg Straps

This black faux leather peplum harness combines a structured A-line waist panel with over-shoulder straps and two detachable tassel leg suspenders — giving a single piece the range of a full layering set. The wide waist section cinches at roughly 60–90 cm and sits about 20 cm tall, creating a defined silhouette over any base layer without a corset underneath.

Shoulder & Waist Construction

Two wide faux leather shoulder straps connect at the chest via silver-tone roller buckles and anchor into the peplum waistband, distributing weight evenly across the torso. The waistband itself closes with a center-front silver-tone buckle plus two secondary adjustment loops on each hip, so you can fine-tune both horizontal fit and vertical drop simultaneously.

• Shoulder straps approximately 2.5 cm wide, fully adjustable for torso lengths 40–60 cm
• Waistband buckle closure with 5 notch positions across a roughly 30 cm adjustment range
• Structured peplum skirt panel approximately 20 cm long at front, tapering at the sides
• Silver-tone roller-bar buckles on all adjustment points — no sharp edges on wear surface

Tassel Leg Suspenders

Each leg strap runs from the lower hip ring down to a cluster of four black faux leather tassels, roughly 20 cm long. The straps attach to the waistband with silver-tone O-rings, making them fully detachable — wear the piece as a clean peplum harness belt for daytime or clip the leg straps on for evening looks. One trade-off: the tassel straps hang loose rather than wrapping the thigh, so they are decorative rather than structural.

• Two detachable leg straps, each anchored by a 2.5 cm silver-tone O-ring
• Tassel clusters approximately 20 cm long, made from narrow faux leather strips
• Detach in under 10 seconds — no tools required
• Straps sized to fall along the outer thigh on heights 155–185 cm

How to Style This Harness

Worn over a fitted white tank and wide-leg trousers, the peplum panel frames the waist and the tassels add movement against the trouser leg — a streetwear-to-café look with zero additional accessories. For festival or rave outfits, pair the full piece over a crop top and shorts; the tassel leg straps sway with movement and photograph well under stage lighting. For a cleaner party silhouette, detach the leg straps and wear just the peplum harness belt over a blazer or slip dress.

Sizing & Fit Notes

The waistband adjusts to fit waists 60–90 cm. Shoulder straps cover torso lengths from roughly 40 cm to 60 cm (measured collarbone to natural waist). The peplum panel adds roughly 5 cm of visual hip width at the widest point. This piece does not fit waists above 90 cm without extension hardware; buyers in the 85–90 cm range should note the buckle will sit near its widest notch with limited room to expand.

• Waist range: 60–90 cm (5 notch positions)
• Recommended torso length: 40–60 cm (collarbone to natural waist)
• Peplum hem approximately 20 cm drop at front center
• Fits XS through approximately L/XL depending on waist measurement
• Not recommended for waists above 90 cm without aftermarket extenders

Material & Care

The body and peplum panel are constructed from smooth matte black faux leather (PU-coated woven backing), which holds its shape without internal boning. Hardware is silver-tone zinc alloy — corrosion-resistant for regular wear. Wipe the faux leather surface clean with a damp cloth; do not submerge in water or machine wash, as soaking degrades the PU coating. Store flat or on a wide hanger to prevent creasing along the peplum seams.