Black Faux Leather Star Chest Harness with Silver O-Rings

This black faux leather chest harness is built around a geometric star-shaped strap configuration — angular crossing bands form a sharp pentagram silhouette across the chest, anchored by silver-tone O-rings at every junction. Dual parallel waist bands secure the lower section, and silver metal rivets stud the straps at even intervals for a structured, hardware-heavy finish.

Star Geometry Styling

The angular crossing straps of this chest harness create a focal point that works best against a plain base layer. Wear it over a fitted black turtleneck for a festival harness look, or layer it over a white mesh top for contrast on a rave night. The geometric lines align well with structured outerwear — try it under an open leather jacket where the star pattern frames the chest without being obscured. For streetwear daytime wear, pair it with high-waisted wide-leg trousers and a cropped tank.

• Over a white or black fitted tee for festival harness styling
• Layered over mesh for rave outfit harness looks
• Under an open jacket to frame the star geometry on the chest
• Against a bralette base for a fashion harness editorial style

Sizing and Strap Fit

The straps on this body cage harness adjust at the shoulder and waist sections via side buckle clasps, accommodating a chest circumference of approximately 70 cm to 110 cm. The dual lower waist bands sit roughly 10 cm apart and are fixed in width — buyers with a torso length under 28 cm between bust and navel may find the waist straps sit higher than intended. The harness is designed for a snug, close-fit silhouette; sizing up for a looser drape is not recommended as the geometric strap angles will shift.

• Adjustable chest straps: approximately 70 cm to 110 cm circumference range
• Dual fixed waist bands, approximately 10 cm apart
• Side buckle clasps for on-body adjustment
• Star geometry is proportional to medium torso lengths — shorter torsos may see band placement shift
• Fits XS through XL standard sizing in most cases

Faux Leather Material and Care

The straps are cut from smooth-finish black faux leather (PU-coated fabric), which holds its shape without stretching and has a slight sheen that catches light from the silver rivets. Hardware includes multiple silver-tone O-rings at strap junctions and evenly spaced metal rivets along each band. Faux leather should not be submerged — spot clean with a damp cloth and mild soap, then air dry flat away from direct heat. The material is animal-free and does not require conditioning, but may crack if exposed to prolonged UV or stored folded under pressure.

• Body: smooth PU faux leather (vegan leather), animal-free
• Hardware: silver-tone O-rings and metal rivets
• Spot clean only — damp cloth and mild soap, air dry flat
• Avoid prolonged UV exposure to prevent surface cracking
• Store flat or loosely rolled, not folded under weight

O-Ring Hardware Detail

Five silver-tone O-rings are positioned at the key strap junction points — one center chest, one center waist, and one at each shoulder and outer chest cross. Each ring measures approximately 2 cm in inner diameter and functions as both a structural connector and a visible design detail. The O-ring harness hardware is non-removable and integral to the geometric star shape. Note that the rings are decorative load-bearing connectors — they are not rated for suspension use and should be treated as fashion hardware only.