Black Faux Leather Star Cross Chest Harness with O-Rings

This black faux leather chest harness sits over the upper chest and shoulders, its straps crossing in a five-point star configuration secured at each intersection with a silver-tone O-ring and flat rivet studs. The geometry is precise — not a loose wrap, but a structured cage that stays centered through movement.

Star Strap Configuration

Five flat faux leather straps — each approximately 1.2 cm wide — cross at the sternum and upper chest to form a pentagram-inspired layout. Each crossing point is anchored with a silver O-ring threaded through the straps, preventing shift during wear. Additional dome-head rivet studs run along the strap lengths, adding a subtle metal accent without adding bulk.

• Pentagram cross-strap geometry, visible from the front
• Four silver O-ring junctions across the chest panel
• Dome rivet studs spaced approximately every 3 cm along outer straps
• Shoulder straps extend upward to a neck loop for overhead support
• Bottom strap closes at the under-bust level for a snug anchor

How to Style This Harness

Wear over a plain white fitted tee for a contrast-forward streetwear look, letting the black straps frame the chest without covering fabric below. For festival season, layer it directly over bare skin with wide-leg trousers and platform boots — the star pattern reads clearly from a distance in natural light. It also sits cleanly over a black mesh top, blending the strap color while the O-rings remain visible as metallic accents in a rave outfit harness context.

• Over a white tee for streetwear contrast
• Directly on skin for festival and rave looks
• Over black mesh for a tonal, hardware-forward layering effect

Sizing and Fit

The harness uses adjustable slider buckles on the shoulder straps and the under-bust closure, fitting a chest circumference range of approximately 75 cm to 105 cm. The neck loop is fixed length — wearers with a neck circumference above approximately 40 cm may find the shoulder-to-neck section tight. The strap width of 1.2 cm is narrow enough that the harness does not add visible bulk under open outerwear, but the structured O-ring junctions do sit slightly proud of the chest surface (about 0.8 cm lift), which is a trade-off to be aware of when layering under close-fitting jackets.

Material and Care

The straps are cut from vegan faux leather — a PU-coated textile backing — which gives the flat, smooth surface visible in the image. The material does not crack at the O-ring contact points under normal use, but prolonged exposure to moisture should be avoided; the PU finish can delaminate if soaked. Hardware is silver-tone zinc alloy, which resists tarnish in dry conditions. Wipe clean with a damp cloth only — do not machine wash, do not iron, keep away from direct heat above 40 degrees Celsius.