Geometric Black Body Harness with Silver O-Ring Hardware

This geometric black harness is a strappy faux leather chest harness with crisscrossing straps that form a triangular pattern from the shoulders down to a center front connector. Small silver-toned rivets mark each strap intersection, and the piece closes at the back so it layers over a tank, tee, or bodysuit instead of standing alone as a top. It reads as a fashion harness accent rather than a garment on its own.

Strap & Hardware Design

Four straps meet at a central O-ring style loop below the chest, then split again toward the shoulders and sides, which is what creates the geometric cage effect across the front. Hardware is finished in a matte silver tone that contrasts against the black faux leather, and every junction is riveted rather than glued so the straps keep their angle after repeated wear and removal. The rivets sit flush against the strap surface rather than protruding, so the harness lies flat under a fitted layer instead of catching on fabric.

• Strap width of approximately 1.2 cm at the narrowest points
• Adjustable back buckle with roughly 2.5 cm of range per notch
• Silver-toned metal rivets fastened at every strap intersection
• Single front O-ring connector anchoring the full geometric layout
• Package includes the harness only; the top shown is not included

Festival & Rave Styling

Because the straps sit flat against fabric rather than skin, this piece is built to be layered, not worn bare. Two combinations that work well: over a fitted black bodysuit for a rave outfit look where the straps read as the only visible detail, or over a plain grey or white tank so the geometric lines stand out against a solid color. It also layers over a sheer mesh top for festival wear when you want the strappy harness visible through the fabric underneath. On an open denim jacket or unbuttoned shirt, the geometric straps show through the gap at the front, so the effect changes with how much of the underlayer stays visible.

Sizing & Fit

This harness is offered in XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL, and 6XL/7XL, with the back buckle giving extra adjustment inside each labeled range. The triangular front sits higher on narrower chests and drops lower as the size increases, so placement is not identical across every torso length.

• Fits narrower frames best in the XS/S and S/M ranges, where the O-ring sits closer to the collarbone
• 4XL/5XL and 6XL/7XL allow the most buckle adjustment for fuller chests and broader shoulders
• Not a one-size design; check your usual harness size against these six labels before ordering

Material & Care

The straps are cut from faux leather over a firm woven backing, which is what keeps the geometric shape from sagging or twisting during wear. Wipe the straps down with a damp cloth rather than machine washing, and keep the hardware away from prolonged moisture so the rivets do not tarnish. With normal wear the faux leather resists cracking better than a stiff PU alternative, though direct sunlight over time will dull the black finish faster than flat storage in a drawer.