Triple Strap Black Faux Leather Choker with Silver Studs

This choker layers three separate straps of black faux leather into a single structured band, joined along one side by a rectangular hardware plate fitted with three round silver studs. Unlike a single flat band, the gaps between the straps let skin show through in thin lines, giving the piece a strappy, layered profile without covering the full throat. Each strap measures approximately 1 cm wide, and the hardware plate sits slightly off-center rather than in the middle of the neck.

Triple Strap Hardware

The three straps are cut flat rather than rolled, so the faux leather keeps a matte, slightly textured surface instead of a glossy shine. All three straps meet at one rectangular plate, where three round silver-tone studs are fixed in a vertical row rather than scattered across the band. That plate is the only rigid section of the choker; everywhere else, the straps flex independently with movement instead of holding one fixed shape.

• Three horizontal faux leather straps, each approximately 1 cm wide
• Three round silver-tone studs fixed in a vertical row on one side plate
• Total band height of roughly 4.5 cm across all three straps and gaps
• Adjustable buckle closure at the back, not a fixed loop
• Lightweight build at under 50 grams, so it does not pull on the neck

Festival & Streetwear Styling

Layer it under a black slip dress with the straps sitting above the neckline for a festival-ready look, or pair it with a plain crewneck tee and straight-leg denim for a daytime streetwear outfit. Because the band sits close to the throat rather than draping loosely, it reads as one deliberate neck piece rather than one of several stacked chokers, so it works best worn alone instead of layered with other necklaces. For evening wear, it also sits well against a low round-neck top where the strap lines stay visible instead of being hidden under fabric.

Sizing & Fit

The buckle closure adjusts across roughly 30 cm to 40 cm of neck circumference, which covers most adult neck sizes without needing a separate size chart. Because the straps sit flat and structured rather than soft and draping, the choker will feel snug rather than loose on necks larger than about 40 cm, and it is not the right fit for anyone who prefers jewelry that hangs away from the skin. The rectangular hardware plate adds a small amount of extra width on one side of the neck, so it sits slightly asymmetrically rather than perfectly centered.

• Adjustable range of approximately 30 cm to 40 cm neck circumference
• Best suited to a snug, structured fit rather than a loose drape
• Not designed to stretch past the buckle holes provided
• Sits at the base of the throat, just above the collarbone

Material & Care

The straps and hardware plate are made from black faux leather, with silver-tone metal studs and a metal buckle closure; no fabric lining sits behind the straps against the skin. Wipe the faux leather with a damp cloth and a small amount of mild soap rather than machine washing or soaking it, since prolonged water exposure can dry out and crack the surface over time. Store the choker flat or loosely coiled instead of folded tightly, since sharp folds can leave permanent creases in the straps. With normal handling, the studs and buckle hardware should keep their silver-tone finish without regular polishing.